Aluminium equal angle 15 × 15 × 1.2 mm
It weighs 0.1 kg per metre: a 6 m length weighs 0.6 kg. Here you have the drawing, the dimensions and the weight for different numbers of lengths.
- Code
- 6607
- Type
- Equal angle
- Dimensions (mm)
- A15B1.2
- Weight per metre
- 0.1 kg/m
- 6 m length
- 0.6 kg
- Metres per kilo
- 10 m
- Equivalent cross-section
- 37.1 mm²
- How it is measured
- A is the length of the legs, which are equal; B is the thickness. CR: rounded edge. It is a different profile, not the same size.
How much do the lengths weigh?
| 6 m lengths | 1 | 5 | 10 | 25 | 50 | 100 |
|---|---|---|---|---|---|---|
| Weight | 0.6 kg | 3 kg | 6 kg | 15 kg | 30 kg | 60 kg |
| Metres | 6 m | 30 m | 60 m | 150 m | 300 m | 600 m |
How much load does the 15 × 15 × 1.2 equal angle take?
Supported at both ends, with the load at midspan: how many kilos it takes before it bends more than 1/200 of the span (what windows and light structures usually accept) or goes past the elastic limit of 6063-T5 aluminium.
| Span | 0.5 m | 1 m | 1.5 m | 2 m |
|---|---|---|---|---|
| Load at midspan | 5.1 kg | 1.3 kg | 0.6 kg | 0.3 kg |
Moment of inertia 0.08 cm⁴; section modulus 0.07 cm³. A guidance calculation for a straight beam with sharp corners, E = 69 GPa, without its own weight or buckling of thin walls: for a structure, the check must be done by an engineer.
Need this profile?
Ask about availability, alloy, temper and finish, work out the kilos for your order or how many lengths you need for your cuts.
Other sizes of equal angles
- 12.7 × 12.7 × 1.20.08 kg/m · code 6603
- 15 × 15 × 1.50.116 kg/m · code 6672
- 15.8 × 15.8 × 10.077 kg/m · code 6610
- 15.3 × 15.3 × 1.50.118 kg/m · code 6609
- 15.9 × 15.9 × 1.50.123 kg/m · code 6612
- 16 × 16 × 1.50.123 kg/m · code 6521
- 19.5 × 19.5 × 1.10.114 kg/m · code 6618
- 12.5 × 12.5 × 10.097 kg/m · code 6602
Data from the Perfiles de Aluminio standard profile catalogue, 2026 edition, published with its permission. The weight per metre is the one declared by the manufacturer; the actual weight may vary within the tolerances of the standard. The equivalent cross-section is calculated with a density of 2.699 g/cm³. Standard length: 6 m.